Wholesale Dealers of Carbon Steel Rebar Connector - GZL-45 Rebar Thread Cutting Machine – YIDA
Short Description:
As an important parallel thread connection technology, the upset forging parallel thread connection technology posses following advantage: 1, Wide working range: adaptable for Φ12mm-Φ50mm same diameter, different diameter, bending, new and old, advance covered up rebar of GB 1499, BS 4449, ASTM A615 or ASTM A706 standard. 2, High strength: stronger than the reinforcement bar and guarantees bar break under tensile stress(tensile strength of bar joint =1.1 times of bar’s specified tensile stren...
Wholesale Dealers of Carbon Steel Rebar Connector - GZL-45 Rebar Thread Cutting Machine – YIDA Detail:
As an important parallel thread connection technology, the upset forging parallel thread connection technology posses following advantage:
1, Wide working range: adaptable for Φ12mm-Φ50mm same diameter, different diameter,
bending, new and old, advance covered up rebar of GB 1499, BS 4449, ASTM A615 or ASTM A706 standard.
2, High strength: stronger than the reinforcement bar and guarantees bar break under tensile stress(tensile strength of bar joint =1.1 times of bar’s specified tensile strength). It can satisfy the requirements stipulated in the Chinese standard JGJ107-2003, JG171-2005.
3, High efficiency: upset forging and threading one joint only needs no more than one minute, and handy operation and quick link.
4, Environmental protection and economy profit: no environment pollution, can work all day, not affected by weather, economize energy source and bar material.
(GZL-45 Machine )Steel bar Parallel Thread Cutting Machine
| Rebar diameter range: |
φ16－φ40 |
| Threading cutting speed |
32r/min |
| Backing speed |
64r/min |
| Electric motor power: |
2.4/3KW |
| Cutting head movement distance: |
150mm |
| Out dimension(mm): |
1325×570×1070mm |
| Weight: |
537Kg |
This machine is used to cut the thread for rebar end after cold forging.
Processing Machine
1. (BDC-1 Machine )Rebar End Upset Forging Parallel Thread Machine
| Rebar diameter range: |
φ12－φ40 |
| Oil pump flux: |
5L/min |
| Rating power: |
＜60Mpa |
| Electric motor power: |
4KW |
| Piston movement distance: |
100mm |
| Out dimension(mm): |
1225×570×1100mm |
| Weight: |
597Kg |
This machine is the preparative machine for rebar connection in construction work. Its main function is to forging the end part of rebar to raise the rebar area and therefore enlarge the strength of rebar end.
Working principle:
1,First,we use Upset Forging Parallel Thread Machine (BDC-1 Machine) to forge the end of rebar.
2,Second we use Parallel Thread Cutting Machine (BDC-2 Machine) to thread the ends of the rebar which have been forged.
3.Third,a coupler is used to link the two ends of rebar in parallel thread.
Product detail pictures:
Related Product Guide:
Steel Square Bars For Your Roof
What Is a Stainless Steel Bar?
To continually enhance the management technique by virtue of your rule of "sincerely, great faith and high-quality are the base of company development", we widely absorb the essence of similar merchandise internationally, and continuously build new merchandise to meet the demands of customers for Wholesale Dealers of Carbon Steel Rebar Connector - GZL-45 Rebar Thread Cutting Machine – YIDA, The product will supply to all over the world, such as: Panama, Poland, Amman, If you are for any reason unsure which product to select, do not hesitate to contact us and we will be delighted to advise and assist you. This way we will be providing you with all the knowledge needed to make the best choice. Our company strictly follows "Survive by good quality, Develop by keeping good credit. " operation policy. Welcome all the clients old and new to visit our company and talk about the business. We are looking for more and more customers to create the glorious future.
By Ivy from Poland - 2015.12.22 12:52
A good manufacturers, we have cooperated twice, good quality and good service attitude.
By Priscilla from Sweden - 2016.05.02 11:33
