GD-150 Mishiin been abuur ah oo toos ah
Sharaxaad Gaaban:
Mashiinka Farsamaynta Farsamaynta Isbarbardhigga Mashiinka Farsamaynta Qalabka 1. (GD-150 Mashiinka Tooska ah) Mashiinka Farsamaynta Tooska ah ee Dhammaadka Farsamaynta Mashiinka Farsamaynta Mashiinka Foornada Qaabka BDC-Auto 1 Cabbirka Rebar ku habboon (mm) 16-40mm Voltage: 380V/3 Wajiga/50Hz Nom.Xoogaga kacsan (kN) 2000 Cabirka (mm) 1300*680*1400 Miisaanka (kg) 850KG Qaabka Bamka Haydarooliga XB6.3/80 Nom.Cadaadiska saliidda (Mpa) 80-90 Nom.Socodka (L/min) 10.00 Awooda Matoorka Wayn (kw) 7.5 (380V/3 ...
Tignoolajiyada isku midka ah ee been abuurka ah ee xanaaqsan
Mashiinka farsamaynta
1. (GD-150BaabuurmaticMashiinka) Rebar toos ahDhammaadxanaaqsanBeen abuurashoMashiinka
| Mashiinka been abuurka ee xanaaqsan | Habka | BDC-Auto 1 |
| Cabbirka Rebar ku habboon (mm) | 16-40mm | |
| Voltage: | 380V/3 Wajiga/50Hz | |
| Nom.Xoogaga kacsan (kN) | 2000 | |
| Cabirka (mm) | 1300*680*1400 | |
| Miisaanka (kg) | 850KG | |
| Bamka Haydarooliga | Habka | XB6.3/80 |
| Nom.Cadaadiska Saliida (Mpa) | 80-90 | |
| Nom.Socodka (L/min) | 10.00 | |
| Awooda Matoorka Weyn (kw) | 7.5 (380V/3 Wajiga/50HzAma la habeeyey) | |
| Cabirka (mm) | 800*550*900 | |
| Miisaanka (kg) | 150KG |
Mashiinkaani waa mashiinka diyaarinta ee isku xirka rebar ee shaqada dhismaha.Shaqadeeda ugu weyni waa inay abuurto qaybta dambe ee rebar si ay kor ugu qaaddo aagga rebar oo sidaas awgeed ay balaadhiso xoogga dhamaadka rebar.
2. (GZL-45 Mishiinka Baabuurka)Birta birta ahBarbar socdaDulqaad jartingMashiinka
| Baaxadda dhexroorka Rebar: | φ16-φ40 |
| Xawaaraha goynta dunta | 32r/min |
| Xawaaraha dhabarka | 64r/min |
| Awood koronto: | 2.4/3KW |
| Goynta masaafada dhaqdhaqaaqa madaxa: | 150mm |
| Cabirka ka baxsan (mm): | 1325×570×1070mm |
| Miisaanka: | 537Kg |
Mashiinkan waxaa loo isticmaalaa in lagu gooyo dunta dhamaadka rebar ka dib samaynta qabow.Waxa kale oo loo isticmaali karaa duubista dunta iyo sidoo kale dhererka boodhka ee ka sarreeya 500mm, boolal dherer aan xadidnayn.
3.Lammaanayaasha Rebar
Faa'iidooyinka:
| l feature Bar-jebinta dammaanad si buuxda u dheerayn ductile.l Wax la dhimi maayo aagga isgoysyada bar. |  |
Halbeegyada lamaane Upsetting caadiga ah:
| Cabbirka | Dulqaad | D (±0.5)mm | L (±1) mm | P | Miisaanka (Kg) |
| Φ16 | M20 | 26 | 40 | 2.5 | 0.09 |
| Φ18 | M22 | 29 | 44 | 2.5 | 0.114 |
| Φ20 | M24 | 32 | 48 | 3 | 0.16 |
| Φ22 | M27 | 36 | 52 | 3 | 0.207 |
| Φ25 | M30 | 40 | 60 | 3.5 | 0.32 |
| Φ28 | M33 | 44 | 66 | 3.5 | 0.398 |
| Φ32 | M36 | 50 | 72 | 4 | 0.62 |
| Φ36 | M39 | 56 | 80 | 4 | 0.875 |
| Φ40 | M45 | 62 | 90 | 4 | 1.138 |
Maaddada lammaanaha rebar waa No.45 bir.
Mabda'a shaqada:
1, Marka hore, Waxaan isticmaalnaa GQ50 mashiinka goynta rebar si ay u kala qaybiyaan dhamaadka rebar.
2, Marka labaad, waxaan isticmaalnaa Mashiinka Isku-dhafka Been-abuurka ah (GD-150 Automatic Machine) si loo abuuro dhamaadka rebar.
3.Saddexaad, waxaan isticmaalnaa Mashiinka Goynta Isku-dhafka ah (GZ-45 Automatic Machine) si loo dhajiyo cidhifyada rebar-ka ee la been-abuuray.
4.Fourth, lammaane xanaaqsan ayaa loo isticmaalaa in lagu xidho labada daraf ee rebar ee dunta is barbar socda.
GolahaFaa'iidada
1. Looma baahna fur-fure.
2. Golaha lagu ansixiyay kormeer muuqaal ah.
3. Soo-saarka lammaaneyaasha hoos yimaada qorshooyinka tayada adag.
4. Naqshadeynta xargaha cabbirka ee isbarbardhigga ISO Standard.
Hadalo:
Marka loo eego heerka Shiinaha GB 1499.2-2007,
Rebar HRB400: Tensile strEngth≥54t0Mpa, Yeild energy≥400Mpa;
for rebar HRB500: Xoog xajin≥630Mpa, Yeild xoog≥500Mpa.
Tiknoolajiyada isku midka ah ee isku midka ah ee been abuurka ah looma isticmaali karo oo keliya isku xirka HRB400, laakiin sidoo kale rebar kale, sida HRB500, kaas oo awooddiisa xajintu ay ka sarreyso 700Mpa iyo wixii la mid ah.