GZL-45 Rebar Thread Cutting Machine
Nkọwa dị mkpirikpi:
Dị ka ihe dị mkpa yiri eri njikọ technology, iwe iwe forging yiri eri njikọ technology nwere na-esonụ uru: 1, Wide arụ ọrụ nso: adaptable maka Φ12mm-Φ50mm otu dayameta, dị iche iche dayameta, ekwe, ọhụrụ na ochie, ọganihu kpuchie elu rebar nke GB 1499, BS 4449, ASTM A615 ma ọ bụ ASTM A706 ọkọlọtọ.2, Ike dị elu: siri ike karịa ogwe nkwado ahụ ma na-ekwe nkwa nkwụsị mmanya n'okpuru nrụgide nrụgide (ike nkwụsị nke nkwonkwo mmanya = 1.1 ugboro nke ogwe aka kpọmkwem nhịahụ stren ...
Dị ka teknụzụ njikọ njikọ eriri dị mkpa dị mkpa, teknụzụ njikọ njikọ na-ewe iwe nwere uru ndị a:
1, Ogologo ọrụ zuru oke: mgbanwe maka Φ12mm-Φ50mm otu dayameta, dayameta dị iche iche,
na-ehulata, nke ọhụrụ na nke ochie, ọganihu kpuchie rebar GB 1499, BS 4449, ASTM A615 ma ọ bụ ASTM A706 ọkọlọtọ.
2, Ike dị elu: siri ike karịa ogwe nkwado ma na-ekwe nkwa nkwụsị mmanya n'okpuru nrụgide tensile (ike nkwụsị nke nkwonkwo mmanya = 1.1 ugboro nke ike nkwụsị nke mmanya).Ọ nwere ike imeju ihe ndị achọrọ na ọkọlọtọ Chinese JGJ107-2003, JG171-2005.
3, Ịrụ ọrụ dị elu: iwe iwe iwe na ntinye otu nkwonkwo chọrọ naanị ihe karịrị otu nkeji, yana ọrụ aka na njikọ ngwa ngwa.
4, Nchekwa gburugburu ebe obibi na uru akụ na ụba: enweghị mmetọ gburugburu ebe obibi, nwere ike ịrụ ọrụ ụbọchị dum, ọ bụghị emetụta ihu igwe, na-eme ka isi iyi ike na ihe mmanya.
(igwe GZL-45)Ogwe igweYirieri BeetingIgwe
Oke dayameta mgbanaka: | φ16-φ40 |
Threading ọnwụ ọsọ | 32r/min |
Ọsọ nkwado | 64r/min |
Ike moto eletrik: | 2.4/3KW |
Ogologo mmegharị nke isi: | 150mm |
Akụkụ dịpụrụ adịpụ (mm): | 1325×570×1070mm |
Ibu: | 537kg |
A na-eji igwe a na-egbutu eri maka njedebe rebar ka emechara oyi.
Igwe nhazi
1. (igwe BDC-1)RebarỌgwụgwụBilie dị njikereNa-akpụ akpụEriri NdekotaIgwe
Oke dayameta mgbanaka: | φ12-φ40 |
Mgbapụta mgbapụta mmanụ: | 5L/min |
Ike akara: | .60Mpa |
Ike moto eletrik: | 4KW |
Ogologo mmegharị piston: | 100mm |
Akụkụ dịpụrụ adịpụ (mm): | 1225×570×1100mm |
Arọ: | 597kg |
Igwe a bụ igwe akwadoro maka njikọ rebar na ọrụ owuwu.Isi ọrụ ya bụ imepụta akụkụ njedebe nke rebar iji bulie mpaghara rebar wee mee ka ike nke njedebe rebar gbasaa.
Ụkpụrụ ọrụ:
1, Mbụ, anyị na-eji Upset Forging Parallel Thread Machine (BDC-1 Machine) iji mepụta njedebe nke rebar.
2, Nke abụọ anyị na-eji Parallel Thread Cutting Machine (BDC-2 Machine) na-eji eri na nsọtụ nke rebar nke e cheworo.
3. Nke atọ, a na-eji coupler jikọta ọnụ abụọ nke rebar na eri yiri ya.