GD-150 akpaka iwe iwe akpụ igwe
Nkọwa dị mkpirikpi:
Upset Forging Parallel Thread Technology Processing Machine 1. (GD-150 Automatic Machine) Automatic Rebar End Upset Machine Upset Forging Machine Mode BDC-Auto 1 Kwesịrị Ekwesị Rebar size (mm) 16-40mm Voltage: 380V/3 Phase/50Hz Nom.Ike iwe iwe (kN) 2000 Akụkụ (mm) 1300*680*1400 arọ (kg) 850KG Ụdị mgbapụta Hydraulic XB6.3/80 Nom.Nrụgide mmanụ (Mpa) 80-90 Nom.Nfe (L/min) 10.00 Ike nke Isi moto (kw) 7.5 (380V/3 ...
Nkà na ụzụ na-emekọ ihe ọnụ na-ewe iwe
Igwe nhazi
1. (GD-150AkpaakamaticIgwe) Mgbochi akpaakaỌgwụgwụBilie dị njikereNa-akpụ akpụIgwe
| Igwe na-akpụ akpụ iwe | Ụdị | BDC - akpaaka 1 |
| Ogo rebar dabara adaba (mm) | 16-40 mm | |
| Voltaji: | 380Oge V/3/50Hz | |
| Nọmba.Ike iwe iwe (kN) | 2000 | |
| Akụkụ (mm) | 1300*680*1400 | |
| Ibu (kg) | 850KG | |
| Igwe mgbapụta hydraulic | Ụdị | XB6.3/80 |
| Nọmba.Nrụgide mmanụ (Mpa) | 80-90 | |
| Nọmba.Mgbapụta (L/min) | 10.00 | |
| Ike nke nnukwu moto (kw) | 7.5380V/3 Oge/50HzMa ọ bụ ahaziri) | |
| Akụkụ (mm) | 800*550*900 | |
| Ibu (kg) | 150KG |
Igwe a bụ igwe akwadoro maka njikọ rebar na ọrụ owuwu.Isi ọrụ ya bụ imepụta akụkụ njedebe nke rebar iji bulie mpaghara rebar wee mee ka ike nke njedebe rebar gbasaa.
2. Igwe akpaaka (GZL-45)Ogwe igweYirieri BeetingIgwe
| Oke dayameta mgbanaka: | φ16-φ40 |
| Threading ọnwụ ọsọ | 32r/min |
| Ọsọ nkwado | 64r/min |
| Ike moto eletrik: | 2.4/3KW |
| Ogologo mmegharị nke isi: | 150mm |
| Akụkụ dịpụrụ adịpụ (mm): | 1325×570×1070mm |
| Ibu: | 537kg |
A na-eji igwe a na-egbutu eri maka njedebe rebar ka emechara oyi. Ma enwere ike iji ya mee ihe na-atụgharị eri yana ogologo bolt n'elu 500mm, na-enweghị njedebe ogologo bolts.
3.Rebar Couplers
Uru:
| l Bar-agbaji atụmatụ na-ekwe nkwa n'ụzọ zuru ezu ductile elongation.l Ọ dịghị mbelata nke mmanya cross-ngalaba. |  |
Paragraf nke ọkọlọtọ Upsetting couplers:
| Nha | eri | D (± 0.5) mm | L (±1) mm | P | Arọ(Kg) |
| Φ16 | M20 | 26 | 40 | 2.5 | 0.09 |
| Φ18 | M22 | 29 | 44 | 2.5 | 0.114 |
| Φ20 | M24 | 32 | 48 | 3 | 0.16 |
| Φ22 | M27 | 36 | 52 | 3 | 0.207 |
| Φ25 | M30 | 40 | 60 | 3.5 | 0.32 |
| Φ28 | M33 | 44 | 66 | 3.5 | 0,398 |
| Φ32 | M36 | 50 | 72 | 4 | 0.62 |
| Φ36 | M39 | 56 | 80 | 4 | 0,875 |
| Φ40 | M45 | 62 | 90 | 4 | 1.138 |
Ihe nke rebar coupler bụ No.45 ígwè.
Ụkpụrụ ọrụ:
1, Mbụ, Anyị na-eji GQ50 rebar ọnwụ igwe splice elu njedebe nke rebar.
2, Nke abụọ, anyị na-eji Upset Forging Parallel Thread Machine (GD-150 Automatic Machine) iji mepụta njedebe nke rebar.
3.Third, anyị na-eji Parallel Thread Cutting Machine (GZ-45 Automatic Machine) na-agbanye na njedebe nke rebar nke e meworo.
4.Fourth, ihe na-ewe iwe na-ejikọta ọnụ abụọ nke rebar na yiri eri.
MgbakọUru
1. Ọnweghị mgbanaka ike chọrọ.
2. Mgbakọ kwadoro site na nlele anya.
3. Nrụpụta nke di na nwunye n'okpuru ezigbo atụmatụ atụmatụ.
4. Ọkọlọtọ ISO Parallel Metric Thread imewe.
Okwu:
Dị ka ọkọlọtọ Chinese GB 1499.2-2007 si dị,
maka rebar HRB400: Tensile strEngth≥54t0Mpa, Yeild ike≥400Mpa;
maka rebar HRB500: Tensile ike ≥630Mpa, Yeild ike≥500Mpa.
The iwe forging yiri eri njikọ technology nwere ike ọ bụghị nanị na-eji maka njikọ nke HRB400, kamakwa ndị ọzọ rebar, dị ka HRB500, onye tensile ike dị elu karịa 700Mpa na na.