Rib Peeling Rebar Coupler
Takaitaccen Bayani:
Rebar Coupler An raba ƙirar ma'auratan zuwa kashi 9 bisa ga Rebar Coupler.(Raka'a: mm) 1) .Ma'aunin ma'aurata Girman (mm) O D±0.5（mm） Zare (mm) L±0.5 (mm) Pitch Rib peeling coupler nauyi/pc (kg) Zare Angle Φ16 25 M16.5 40 2.0 0.111 60 Digiri Φ18 28 M18.5 45 2.5 0.136 Φ20 31 M20.5 50 0.175 Φ22 33 M22.5 55 0.203 Φ25 36 6 0.5 .
RebarMa'auratar
Thesplicing ma'auratamodel nekasu kashi 9sassaA cewar Rebar Coupler.(Naúrar:mm)
1).Thesiga na ma'aurata
| Girman (mm) | O D± 0.5 (mm) | Zare (mm) | L±0.5 (mm) | Fita | Nauyin haƙarƙari ma'auni/pc (kg) | Kusurwar Zare |
| Φ16 | 25 | M16.5 | 40 | 2.0 | 0.111 | 60 Digiri |
| Φ18 | 28 | M18.5 | 45 | 2.5 | 0.136 | |
| Φ20 | 31 | M20.5 | 50 | 0.175 | ||
| Φ22 | 33 | M22.5 | 55 | 0.203 | ||
| Φ25 | 37 | M25.5 | 60 | 0.266 | ||
| Φ28 | 41 | M28.6 | 70 | 3.0 | 0.375 | |
| Φ32 | 47 | M32.6 | 75 | 0.533 | ||
| Φ36 | 54 | M36.5 | 85 | 0.828 | ||
| Φ40 | 59 | M40.2 | 95 | 1.085 |
2).Halayen Amfani
| Yanayin | lokacin amfani |
| Daidaitaccen Samfurin | da aka yi amfani da shi a cikin lokaci don haɗa ma'aunin karfe a yanayin al'ada |
| Model Diamita daban-daban | ana amfani dashi don haɗa sandar ƙarfe a cikin diamita daban-daban |
| Samfurin Wuta | amfani da karfen karfe wanda ke da wuyar daidaitawa |
| Samfurin Zare Mai Kyau Kuma Mara Kyau | Ana amfani da shi a lokacin da sandar karfe a bangarorin biyu ba za a iya juya ba amma ana iya daidaita tsayin. |
| Makullin Nut Model | Ana amfani da shi lokacin da ba za a iya juya sandar karfe ba, sannan yana juya ma'aunin splicing don shiga sandar karfe sannan kuma a kulle ma'aunin splicing tare da goro na kulle. |
3)abuna splicing coupler
The abu na splicing coupler ne constructional ingancin karfe No.45 karfe.
