Best Price for Steel Rebar Coupler Connectors - GZL-45 Automatic Rebar Thread Cutting Machine – YIDA
Short Description:
As an important parallel thread connection technology, the upset forging parallel thread connection technology posses following advantage: 1, Wide working range: adaptable for Φ12mm-Φ50mm same diameter, different diameter, bending, new and old, advance covered up rebar of GB 1499, BS 4449, ASTM A615 or ASTM A706 standard. 2, High strength: stronger than the reinforcement bar and guarantees bar break under tensile stress(tensile strength of bar joint =1.1 times of bar’s specified tensile stren...
Best Price for Steel Rebar Coupler Connectors - GZL-45 Automatic Rebar Thread Cutting Machine – YIDA Detail:
As an important parallel thread connection technology, the upset forging parallel thread connection technology posses following advantage:
1, Wide working range: adaptable for Φ12mm-Φ50mm same diameter, different diameter,
bending, new and old, advance covered up rebar of GB 1499, BS 4449, ASTM A615 or ASTM A706 standard.
2, High strength: stronger than the reinforcement bar and guarantees bar break under tensile stress(tensile strength of bar joint =1.1 times of bar’s specified tensile strength). It can satisfy the requirements stipulated in the Chinese standard JGJ107-2003, JG171-2005.
3, High efficiency: upset forging and threading one joint only needs no more than one minute, and handy operation and quick link.
4, Environmental protection and economy profit: no environment pollution, can work all day, not affected by weather, economize energy source and bar material.
(GZL-45 Auto Machine )Steel bar Parallel Thread Cutting Machine
| Rebar diameter range: |
φ16－φ40 |
| Threading cutting speed |
32r/min |
| Backing speed |
64r/min |
| Electric motor power: |
2.4/3KW |
| Cutting head movement distance: |
150mm |
| Out dimension(mm): |
1325×570×1070mm |
| Weight: |
537Kg |
This machine is used to cut the thread for rebar end after cold forging.
Processing Machine
1. (BDC-1 Machine )Rebar End Upset Forging Parallel Thread Machine
| Rebar diameter range: |
φ12－φ40 |
| Oil pump flux: |
5L/min |
| Rating power: |
＜60Mpa |
| Electric motor power: |
4KW |
| Piston movement distance: |
100mm |
| Out dimension(mm): |
1225×570×1100mm |
| Weight: |
597Kg |
This machine is the preparative machine for rebar connection in construction work. Its main function is to forging the end part of rebar to raise the rebar area and therefore enlarge the strength of rebar end.
Working principle:
1,First,we use Upset Forging Parallel Thread Machine (GD-150 Automatic Machine) to forge the end of rebar.
2,Second we use Parallel Thread Cutting Machine (GZ-45 Automatic Thread Machine) to thread the ends of the rebar which have been forged.
3.Third,a coupler is used to link the two ends of rebar in parallel thread.
Product detail pictures:
Related Product Guide:
How to Save Time and Cost With a 316 Stainless Steel Bar
Brief on Alloy Steel Round Bars
We have been also specializing in improving the things administration and QC system to ensure that we could preserve terrific gain within the fiercely-competitive company for Best Price for Steel Rebar Coupler Connectors - GZL-45 Automatic Rebar Thread Cutting Machine – YIDA, The product will supply to all over the world, such as: Sheffield, Estonia, Afghanistan, Thus far, our item associated with printer dtg a4 may be shown in most foreign nations as well as urban centers, which are sought after simply by targeted traffic. We all highly imagine that now we have now the full capacity to present you with contented merchandise. Desire to collect requests of your stuff and produce the long-term co-operation partnership. We very seriously promise:Csame top quality, better price; exact same selling price, higher quality.
By Dinah from Morocco - 2016.01.28 19:59
The company's products very well, we have purchased and cooperated many times, fair price and assured quality, in short, this is a trustworthy company!
By Murray from Cape Town - 2015.12.05 13:53
